Dimensions Foot/ Lbs Meter/ Kg
LOA 40.00 12.19
LWL 34.60 10.55
Beam 11.91 3.63
Standard Draft 7.22 2.20
Standard Ballast 5,600 2,540
Displacement 14,900 6,760
Engine 40 hp 40 hp
100% SA 865 80.35
I 54.42 16.59
ISP 57.68 17.58
J 15.20 4.63
P 51.34 15.65
E 17.57 5.36
SA/Dspl 23 23
Dspl/L 161 161


J/122E Specifications- June 1st, 2017
Hull & Deck Construction

SCRIMP infusion molded sandwich construction

Uni-and multi-directional fibreglass fabrics

Low density light weight balsa core

Vinylester infusion resin

10 year anti-osmosis warranty and a 5 year structural warranty

Bonded overlapped hull-to-deck joint

Infused structural grid and mast step

SCRIMP infusion molded, main bulkhead.

Keel & Rudder

Low VCG keel with encapsulated cast iron fin & lead bulb

Keel is bolted & bonded to shallow sump

High aspect ratio composite rudder

Uni and multi-directional fibreglass fabrics

Stainless steel rudder stock

Self-aligning performance rudder bearings

Spars & Rigging

Carbon fiber mast with double swept spreader configuration

Aluminium racing boom

Pre-molded mast wedge system

Adjustable mast step

Discontinuous rod standing rigging

Hydraulic backstay adjuster with panel on steering pedestal

Jib furling system with below deck furler drum

Carbon fiber retracting bow sprit

Solid boom vang with purchase

Complete running rigging package

Deck Hardware

Harken winches & deck hardware

Belowdeck 2:1 mainsheet system

Floor mounted mainsheet traveller

Adjustable jib tracks including 8:1 adjustable purchase

Custom stainless steel shroud and backstay chainplates

Bow and stern mooring cleats

Bow anchor locker

Overhead ventilation hatches for head, forward cabin, head & main salon

Opening portlights for head, forward cabin, head, main salon & aft cabins

Exhaust vent openings in main cabin overhead below seahood

Bow & stern rails & stanchions supported double lifelines

Cabin top handrails

Aluminum racing wheel with leather cover

Compass on wheel pedestal with stainless binnacle guard

Acrylic companionway washboard with lock, stored in aft cockpit locker

Emergency tiller

Auxiliary Power

Volvo D2 40 HP Saildrive diesel engine & 115 AH alternator

Volvo engine controls & fuel guage recessed in cockpit with acrylic protection

35 gallon aluminum fuel tank

Sound insulated engine compartment, ventilation pipes

Two-blade folding propeller


Manual & Electric bilge pumps

Pressurized fresh water system with Hot water tank (5 gallon)

Fresh water tank (42 gallon)

DC refrigeration

Marine toilet with holding tank system and pump out

Two 80 AH AGM type batteries & one 70 AH battery for engine

12V Electrical distribution panel

110V distribution panel, main circuit breaker and inlet

Halogen head & cabin lighting package

Low voltage LED navigation lights, mast steaming and mooring lights

Grounding system for protection against lightning

Battery charger


Choice of layout options: 3 cabin or 2 cabin (see illustration above)

Cold-molded, solid, and laminated mahogany wood, finished in satin varnish

White wood effect on hull in main cabin, vinyl lining on hull in sleeping cabins

Cored and insulated doors to all cabin areas

Molded & enclosed head area forward with shower, storage, large sink

Forward cabin V-berth with locker & shelf storage with great ventilation

Main salon area with settee berths, table, lockers, safety handrails

Large galley with double sink, LPG stove/oven, and plenty of outboard storage

Nav station with chart and gear storage, drawers & panel for electronics

Aft cabins with large double berths, storage lockers and shelves, and portlights

Offshore protected companionway with handrails and angled ladder treads