j133msalon

Comfortable, Fast & Easy-to-Handle Sail Plan

Interior Arrangement

J/133 main salon includes a complete J shaped galley and navigation station with full length settees in the main saloon and plenty of storage compartments. Interior finish is varnished cherry wood throughout with cherry battens on the hull in the main saloon and vinyl lining on the hull in sleeping cabins.

The standard layout offers three sleeping cabins and a dual entry head forward, a second head can be substituted for the aft port cabin. This option allows for a large storage area aft of the head, accessible through both the head (belowdecks) and from the port side cockpit storage locker. Space for a generator and additional systems is located in the chaseway area aft of the engine.

Efficient Sail Plan

The shortfall of many cruising sailboats is their over-reliance on large genoas to generate boat speed in lighter airs (under 12 knots), and their lack of stability to carry the same large genoa in winds over 15 knots. The result is a sailplan that, at best, allows one to comfortably sail near target speeds in only the narrowest of wind ranges, without having to go through the hassles of changing sail. With a moderate

 

Sail Area to Displacement ratio and a low Vertical Center of Gravity, J/133 is designed to efficiently cruise with mainsail and 105% jib from 5-20 knots without need of reefing the sails. The bottom line is more sailing and less work on both the crew and the engine.

The mast is a double spreader custom-designed auto-claved carbon section from Hall Spars with aluminum boom and swept spreaders (no runners or checkstays). Rod rigging, integral hydraulic backstay adjuster, roller furling and a complete running rigging package are provided standard. The mast height above the water makes the Intracoastal Waterway a viable option for East Coast USA cruising or low-key regatta deliveries to Key West. The rig and deck plan can also accommodate an inner forestay system for offshore sailing.

The standard keel is designed to provide a low VCG for its weight with an optimized foil shape in section and profile. The standard dual-purpose 7.5’ draft keel is cast antimony-reinforced lead, bolted to a molded sump. A shallower draft keel is also available. The rudder blade is high aspect and shape optimized to provide the control necessary while sailing with an asymmetrical spinnaker. The rudder and rudder shaft are built of carbon fiber and machined to tolerance by ACC Marine.