Dimensions ft/lb  m/kg
LOA 22.50  6.86
LWL 19.00  5.79
Beam 8.00  2.44
Standard Draft 3.80  1.16
Standard Ballast 700  318
Displacement 1,790  812
Engine outboard  outboard
100% SA
 223  20.72
I 24.80  7.56
J 8.80  2.68
P 26.10  7.96
E 9.00  2.74
SA/Dspl 24  24
Dspl/L 117  117
   
   

Hull & Deck Construction
  • Lloyds approved Baltek end grained balsa core laminated construction.
  • Hand Lay-up E-glass in both hull and deck.
  • Hulls molded in one piece for fairness and finish. 
  • Vinylester resin in outer hull skin for 10 year transferable blister warranty.
  • White gelcoat hull and deck.
  • Hi traction non-skid surfaces on deck and cockpit sole.
  • Deck and hull bonded with "Plexus" structural adhesive.
  • ORC sized white thermo-plastic toerails.
  • Structural main bulkhead glassed to hull and deck
  • Heavy-duty stainless steel chainplates bolted to main bulkhead.
  • Anodized aluminum compression post and bearing beam glassed into hull.
  • Molded interior watertight compartments.

Keel & Rudder
  • Lead & Antimony fin keel finished in VC Underwater Epoxy.
  • Near minimum weight faired transom-hung rudder.
  • Heavy-duty SS rudder gudgeons and hardware.
  • Custom laminated tiller with hiking stick.

Spars & Rigging
  • Tapered Hall Spars aluminum class mast
  • Airfoil spreaders with thru‑bar spreader bracket.
  • Gibb "T" terminals, and black measurement bands.
  • Class Certified Boom w/Harken internal outhaul purchase.
  • Forespar spinnaker pole with ultra ends.
  • 1 x 19 Standing Rigging with open body adjustable turnbuckles.
  • Complete class optimized running rigging kit.

Deck Hardware
  • Harken deck hardware kit including mainsheet traveler track and car, spinnaker blocks and hardware, backstay blocks, and halyard cleats.
  • Harken cabin top winches.
  • Schaefer race jib tracks and adjustable cars.
  • Bow chocks and 1 bow pad eye.
  • Stainless Steel hand rails.
  • Transom corner cleats.

Auxiliary Power
  • Optional Lightweight Outboard Bracket
Running Rigging
  • Main Halyard 5/16" T-900 w/Wichard shackle.
  • Jib Halyard 5/16" T-900.
  • Spinnaker Halyard ¼" XLS Extra.
  • Main Sheet 3/8” XLS.
  • Jib Sheet 3/8” STA-SET.
  • Spinnaker Sheets 5/16” STA-SET X Lite.
  • Backstay, Traveler and Twings ¼" Novetec Dinghy Braid.
  • Foreguy 5/16" Ultralite.
  • Vang Line 5/16” STA-SET.
  • Main Cunningham 1:1 - 1/8" Spectra and 3/16" Ultralite.
Options
  • Two Tone Deck.
  • Lightweight outboard motor bracket.
  • V-Berth cushions.
  • Spinnaker Launching Bag (installed).
  • Waterline Systems – Faired Epoxy Bottom.
Notice

Above specifications are subject to change without prior notice or obligation, J Boats and/or US Watercraft reserves the right to periodically upgrade specifications through additions, deletions and substitution.