Home

J/News

J/World

J/Apparel

J/Factory

Write Us

 

J/35 Class Association

Introduced: 1983
Built to: Hull #330
Last Model Year: 1992

Home
Introduction
Principal Dimensions
Standard Equipment
Articles & Reviews
Image Gallery

 


Standard Equipment

Below is an example of the standard equipment provided when J/35s were under construction.  Variations from these specifications should be expected between model years.

MECHANICAL & ELECTRICAL

  • Harken rudder bearings

  • Yanmar 3GM, 28 hp. diesel engine with 2.6:1 reduction gear, oil & fuel filters and tool kit.

  • Cockpit engine instrument panel with tachometer, push button start and alarms for oil pressure, water temp., and electronics.

  • Fuel tank gauge.

  • 20 gallon aluminum fuel tank with inspection/clean out port.

  • Two 90 amp batteries with Guest battery switch.

  • 16x12 Martec folding prop with 1" aquamet¬22 stainless shaft.

  • Bass 12 position circuit breaker electrical panel with battery condition meter.

  • 8 swiveling brass reading lamps, 3 dome R/W overheads and 1 fluorescent light.

  • Navigation & combination steaming/foredeck lights.

  • Raritan head with "V" valve overboard

  • discharge and 13 gallon holding tank.

  • Lightning grounds from chainplates to keel.

SPARS AND RIGGING

  • Hall Spars white, tapered aluminum mast, stepped on keel with double airfoil spreaders and external dual spinnaker halyard cranes.

  • Navtec rod rigging & turnbuckles.

  • 2 internal wire/rope genoa halyards plus 2 dacron spinnaker halyards.

  • Wire/rope internal mainsail halyard with

  • heavy duty screw pin shackle.

  • Harken Hexacat 6 part mainsheet system.

  • Hall tubular "Quick Vang" with 8:1 tackle.

  • 2 internal mainsail reefs, outhaul car and main luff cunningham tackle.

  • Heavy duty welded aluminum mast step mounted over keel.

  • Heavy duty custom stainless chainplates bolted to main bulkhead and transom.

  • 2 genoa sheets and 2 spinnaker sheets

  • Spinnaker pole, socket car on mast track

  • with up/down adjustment.

  • Spinnaker pole foreguy and topping lift.

  • Stainless wire checkstays.

  • Navtec integral hydraulic backstay adjust-

  • ment cylinder.

  • Hood Gemini dual jib luff groove system.

CONSTRUCTION

  • Lloyds approved Baltek Contourkore end grained balsa core laminate construction using hand layup biaxial and uni-directional glass rovings in hull & deck.

  • Interplastic vinylester resin on hull outer layer for optimum blister resistance.

  • GRP laminated main structural bulkhead glassed fore & aft on hull and deck.

  • Hull to deck joint bonded with 3M 5200 and bolted on 4" centers with black anodized T-track.

  • Balanced spade rudder of unidirectional glass rovings with large diameter GRP shaft.

  • Lead & antimony fixed 4400 lb. fin keel, bolted and epoxy bonded then glass wrapped at joint to deep molded structural sump reinforced with solid glass internal cross beams.

  • Self-bailing T-shaped cockpit with molded in storage locker aft.

  • Molded-in non-skid pattern on deck.

  • White hull with optional colors and stripes.

  • Choice of gull grey, beige, or ivory (sand) non-skid pattern on white deck.

DECK HARDWARE

  • Barient 28A, two speed, primary winches.

  • Barient 25A, two speed, secondary winches.

  • Barient 24A, two speed, halyard winches.

  • 3 winch handles.

  • Black anodized inboard genoa tracks with 2 pairs of adjustable roller blocks.

  • Custom stainless stemhead with ss welded double rail bow pulpit with light.

  • Stern rail with center gate for stern boarding or use with optional swim ladder.

  • White PVC coated ss wire double lifelines.

  • 3 four bolt mooring cleats.

  • 3 Lewmar, aluminum framed, bronze tinted "Superhatches" on foredeck, skylight and head.

  • 8 Lewmar, aluminium framed, bronze tinted opening ports with screens on cabin trunk and in cockpit.

  • 3/8" smoked Lexan hatch slide and board.

  • Custom ss inside/outside opening, lockable hatch hasp.

  • Harken mainsheet traveler with tackle controls.

  • Cockpit operated bilge pump.

  • Teak toe-rail on foredeck.

  • Teak handrails on cabin top.

  • Varnished ash tiller with ladder style adjustable hiking stick.

  • 2 deck ventilators.

  • Lewmar Spinlock stoppers on cabin top halyard, pole lift, and reef lines.

GALLEY

  • Stainless, self-contained & gimballed Origo 2 burner alcohol stove with oven, temperature gauge, and 2 pairs of stainless potholders.

  • 5.5 cu.ft. icebox with 4" insulation, cutting board top and sliding interior shelf.

  • 35 gallon molded poly water tank with built in baffles.

  • Stainless steel sink with foot pump.

  • Large dry goods storage area with internal shelf.

  • Pot storage below and behind stove.

  • Trash storage under sink.

  • Hideaway stove top cover & stainless safety bar.

  • Formica counter top with tinted Lexan sliding cabinet doors.

 INTERIOR

  • Varnished teak & holly cabin sole.

  • Cold molded teak trim with oiled teak finish on furnishings and bulkheads.

  • Teak batten (112") covered interior hull sidings in main cabin and quarterberth areas with off-white gelcoat overhead.

  • Private forward V-berth cabin with sliding door.

  • Forward athwartships head with molded sink & foot pump to extension shower, mirrored sliding doors and vanity, toiletries storage and hanging locker.

  • Main cabin settee berths with fixed 3 cushion backrests, pigeon hole storage behind, and two cabinets above each.

  • Choice of 5 Scotchguard 85% wool/15% nylon heavy duty cushion fabrics (beige, camel, gray, blue and red herringbone patterns.)

  • Stand-up navigation station with 36" chart table, chart storage, enclosed shelf and instrument shelf.

  • Bulkhead mounted 40" long teak table with leaf and storage.

  • Teak instrument covers & handrails.

 OPTIONS

  • Hull other than white.

  • Hull Band or Added Striping.

  • Cradle

  • Shrink Wrap

  • Electric Bilge Pump

  • 110 Volt Shorepower with 50' Cord.

  • Slide Out Double Berth to Port.

  • Varnished Interior.

  • Hot & Cold Pressure Water (must be ordered with shorepower or fresh water engine cooling).

  • Wheel Steering, Compass, Guard

  • Elkhide Wheel Cover on Above

  • Chrome Self Tailing Winch Package

  • Dodger

  • Propane Force 10 Oven with Broiler.

  • Transom Swim Ladder

  • Lifeline Gates Amidships

  • 3rd Battery

  • Teak Ceilings in Forepeak

  • Man Overboard Pole Tube

  • Fresh Water Cooled Engine

  • Harken Adjustable Genoa Tracks

  • Kevlar Spinnaker Afterguys

  • Bulkhead Mounted Compasses

  • Vertical Anchor Well

  • Deluxe Forepeak Stateroom (which includes those items marked with (*) above & Head as in J/40. Shower sump, electric sump pump & 44 gallon forepeak water tank also included.

 

© Copyright 2007,  J/Boats, Inc., 557 Thames Street  Newport, RI  02840 - 401.846.8410  Email: J/Boats